Intrepid V6-3.5L VIN V (2002)
Brake Master Cylinder: Service and Repair
Master Cylinder Disassembly and Assembly
MASTER CYLINDER
DISASSEMBLY
1. Remove the master cylinder from the power brake booster.
2. Using an appropriate cleaner such as Mopar Brake Parts Cleaner, clean the master cylinder housing and brake fluid reservoir.
3. Remove the filler cap and empty all brake fluid from reservoir.
4. Clamp the master cylinder in vise.
Reservoir Retaining Pins
5. Remove the 2 fluid reservoir to master cylinder retaining pins.
NOTE: Do not pry off fluid reservoir using a tool, damage to reservoir may result.
Removing Reservoir
6. Remove reservoir from master cylinder by pulling upward on the reservoir while rock it from side-to-side.
