Intrepid V6-3.5L VIN V (2002)
Turn Signal Flasher: Description and Operation
COMBINATION FLASHER
The Combination Flasher, also refered to as the combo-flasher, is mounted to the in-line bracket which is located to the right of the Junction
Block. The flasher can be removed by pulling in a rearward direction. The left under panel silencer duct must be removed to access the flasher.
The combo-flasher is black in color for ease of identification.
The Turn Signal and Hazard Warning Flasher is combined into one unit called a Combination Flasher (Combo-Flasher). The combo-flasher
controls the flashing of the hazard warning system and the turn signal system. An inoperative bulb or incomplete turn signal circuit will result in an
increase in flasher speed.
