Intrepid V6-3.5L VIN V (2002)
3. Remove the nuts from the bolts attaching the strut to the knuckle. Tap the bolts out of the knuckle.
4. Loosely install the camber adjustment bolts and nuts attaching the strut to the steering knuckle. The bolts should be installed so the nuts are
towards the front of the vehicle.
5. Install the tire and wheel assembly.
6. If necessary, repeat steps 2 through 5 to the other side of the vehicle.
7. Lower the vehicle.
8. Jounce the front and rear of vehicle.
9. Adjust the front camber to the preferred setting by pushing in or pulling outward on the top of the wheel and tire as required. When camber is
correct, tighten the upper and lower strut to knuckle camber adjustment bolts to a torque of 203 Nm (150 ft. lbs.).
10. Proceed to Front Wheel Toe Adjustment and adjust front wheel toe as necessary.
FRONT WHEEL TOE ADJUSTMENT
1. Center steering wheel and hold it in place using a steering wheel clamp.
2. Loosen the tie rod adjustment pinch bolt. Rotate the adjustment sleeve to align toe to specifications.
