dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Electronic Vehicle Information Center - Description|Page 7934 > < Diagram Information and Instructions|Page 7931
Page 1
background image

Driver/Vehicle Information Display: Description and Operation
Electronic Vehicle Information Center - Description

DESCRIPTION

The Electronic Vehicle Information Center (EVIC) features a driver-interactive display (29). The display is located in the lower left part of the
instrument cluster below the fuel (2) and engine temperature (1) gauges.

The display in the lower right part of the instrument cluster (15) below the tachometer (13) shows the vehicle odometer related functions. These
functions include Trip Odometer (ODO), Trip A and Trip B readouts. The instrument cluster pushbutton (21) can be used to scroll through the different
odometer functions. See: Instrument Panel, Gauges and Warning Indicators/Instrument Cluster / Carrier/Description and Operation/Instrument Cluster -
Description  for additional information on the instrument cluster and related functions.

The Electronic Vehicle Information Center (EVIC) features a driver-interactive display. It is located in the instrument cluster below the fuel and
temperature gauges. Vehicles equipped with steering wheel-mounted buttons (described) are also equipped with the EVIC. The EVIC consists of the
following:

-

System Status

-

Vehicle information warning message displays

-

Tire Pressure Monitor System (TPM) - If Equipped

-

Personal Settings (customer programmable features)

-

Compass display

-

Outside temperature display

-

Trip computer functions

The EVIC system is comprised of several different components. Those components are:

-

Instrument Cluster (sometimes referred to as Cab Compartment Node [CCN])

-

ASBM EVIC Function Buttons

-

Ambient Temperature Sensor

-

Remote Compass Module (RCM)

-

Controller Area Network (CAN) Data Bus

-

Local Interface Network (LIN) Data Bus

The EVIC display is part of the Instrument Cluster assembly and is not serviced as a separate component. If the display is inoperative the complete
Instrument Cluster assembly must be replaced, See: Instrument Panel, Gauges and Warning Indicators/Instrument Cluster / Carrier/Service and
Repair/Instrument Cluster - Removal.

Electronic Vehicle Information Center - Description|Page 7934 > < Diagram Information and Instructions|Page 7931