Journey FWD V6-3.5L (2009)
Trailer Connector: Description and Operation
Trailer Tow Wiring - Operation
OPERATION
The trailer tow preparation wiring harness is connected to the body wire harness at the right and left outer rear lamp unit connections. After installation is
complete, a trailer tow stop/turn relay is secured to the harness behind the rear bumper fascia just below each outer rear lamp unit, while a trailer tow
stop lamp relay is located on the underside of each outboard end of the rear bumper reinforcement behind the rear fascia. The four-way trailer tow
connector is located near the center of the rear fascia.
Refer to the appropriate wiring information. The wiring information includes wiring diagrams, proper wire and connector repair procedures, further
details on wire harness routing and retention, as well as pin-out and location views for the various wire harness connectors, splices and grounds. Also
refer to the Instruction Sheet packaged with the harness for additional details.
