Journey FWD V6-3.5L (2009)
5. Remove the torx(R) screw (3) at the wheel well housing.
6. Separate the fascia tabs (2) at the bracket (1).
7. Remove the pushpins (1) for the fascia (2) at the lower closeout panel.
8. Slide the fascia (2) out from the mounting tab (1) under the headlamp.
9. Disengage fog lamp wire connector and side marker connector from body harness, if equipped.
10. Disengage the ambient temp sensor wire connector, if equipped.
11. Remove fascia from vehicle.