Journey FWD V6-3.5L (2009)
Front Bumper Reinforcement: Service and Repair
Front Bumper Reinforcement - Installation
INSTALLATION
1. Position the bumper reinforcement (3) on vehicle.
NOTE: Use marks made previously to properly position bumper reinforcement
2. Install the larger bolts (1) attaching bumper reinforcement (3) to frame rail. Tighten bolts (1) to 28 Nm (250 in.lbs.).
3. Install the smaller bolts (2) attaching bumper reinforcement (3) to frame rail.
4. Install front fascia See: Front Bumper Cover / Fascia/Service and Repair/Front Bumper Fascia - Installation.