Journey FWD V6-3.5L (2009)
Cowl Moulding / Trim: Service and Repair
Cowl Panel Inner Cover - Installation
INSTALLATION
1. Install the cowl screen. Install the push-pins (1) securing the cowl screen to the wheelhouse brace and cowl. Rotate the screw (2) in the center of
the cowl screen 90° counterclockwise to lock the screen in place.
2. Install the wiper arms. See: Wiper and Washer Systems/Wiper Arm/Service and Repair/Wiper Arm - Installation
3. Install the cowl top screen (3). Install the two push-pins (1) securing the cowl top screen at the ends. Install the remaining push-pins (2).
