dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Body - Cowl Panel Gap At Windshield/Wind Noise|Page 8202 > < Body - Cowl Panel Gap At Windshield/Wind Noise|Page 8200
Page 4
background image

MODELS:

2009

(JC)

Journey

NOTE:

This bulletin applies to vehicles between January 2, 2008 (MDH0102XX) and April 30, 2008 (MDH0430XX).

SYMPTOM/CONDITION:

The customer may experience one or more of the following conditions:

^

Wind noise from lower windshield and cowl screen panel center area at highway speed.

^

Cowl screen panel gapping or warping from windshield at center area.

DIAGNOSIS:

1.

Inspect the cowl screen panel center section, for gapping from the windshield.

2.

Is the gap 2 mm (0.078 in.) or greater?

a.

Yes >>> Perform the Repair Procedure.

b.

No >>> Repair procedure does not apply. Further diagnosis required.

PARTS REQUIRED:

SPECIAL TOOLS/EQUIPMENT REQUIRED:

REPAIR PROCEDURE:

1.

Remove the inner cowl screen from the vehicle. Refer to the detailed removal procedures available in DealerCONNECT > TechCONNECT under:
Service Info > 23 - BODY > EXTERIOR > COVER, Cowl Panel, Inner > REMOVAL.

Body - Cowl Panel Gap At Windshield/Wind Noise|Page 8202 > < Body - Cowl Panel Gap At Windshield/Wind Noise|Page 8200