Journey FWD V6-3.5L (2009)
5.
Drill a 6.5 mm (0.256 in.) hole in the airbox flange at center of cowl screen hole (Fig. 3).
6.
Install push pin p/n 06501590 through the cowl screen into the airbox hole.
7.
Install the wiper arms and cowl top screen. Refer to the detailed installation procedures available in DealerCONNECT > TechCONNECT under:
Service Info > 23 - BODY > EXTERIOR > COVER, Cowl Panel, Inner > INSTALLATION.
POLICY:
Reimbursable within the provisions of the warranty.
TIME ALLOWANCE:
FAILURE CODE:
Disclaimer:
This bulletin is supplied as technical information only and is not an authorization for repair.