Journey FWD V6-3.5L (2009)
1. Place A-pillar trim (1) into position.
2. Carefully push the bottom end of the trim onto the A-pillar to engage the spring clip retainer.
3. Carefully slide the tether (2) into the housing on the A-pillar trim panel and engage the tether clip (1).
4. Carefully engage the rosebud retainer (6) and push the upper end of the trim to the A-pillar and engage the spring clip retainer.
B-Pillar Trim Panel-Installation
INSTALLATION
1. Insert top of B-pillar trim locator into position.
2. Before hinging B-pillar upward into place, route seat belt anchor through seat belt adjuster opening.
