dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Power Locks > < Keyless Entry Transmitter Battery|Service and Repair
Page 2
background image

NOTE: Do not disturb the metal terminal near the battery. Avoid touching the new battery. Skin oils may cause battery deterioration. If

battery are touched, clean with rubbing alcohol.

This design is a clam shell design whereby both halves are split apart.

1. Remove the valet/spare key from the FOBIK if present.
2. Using a trim stick C-4755 or equivalent, carefully separate the top half from the bottom half.

3. Lift up on the battery to remove.
4. Replace battery with the same type of cell.
5. Install new battery negative side up.
6. Snap the top and bottom halves together.
7. Test FOBIK operation.

Power Locks > < Keyless Entry Transmitter Battery|Service and Repair