Journey FWD V6-3.5L (2009)
Hood Sensor/Switch (For Alarm): Service and Repair
Vehicle Theft Security Hood Ajar Switch - Removal
SWITCH
1. Unlatch and open the hood.
2. Disconnect and isolate the battery negative cable.
3. Disconnect the wire harness connector (3) from the switch connector receptacle.
4. From the top of the hood ajar switch mounting bracket (2), squeeze the two switch latch tabs together and pull the switch (1) upward through the
hole in the mounting bracket.
5. Remove the hood ajar switch from the mounting bracket and discard.