Journey FWD V6-3.5L (2009)
11. Install the cowl top screen (3). Install the two push-pins (1) securing the cowl top screen at the ends. Install the remaining push-pins (2).
12. Install the engine appearance cover.
13. Remove the brake pedal holding tool.
14. Connect the battery negative cable to the battery post. It is important that this be performed properly. See: Starting and Charging/Battery/Service
and Repair/Procedures/Battery Reconnection
15. Hook up the scan tool to initialize the ABM and perform the following:
a. Clear any faults.
b. Fill the master cylinder to the proper fill level and bleed the base and ABS hydraulic systems. See: Brake Bleeding/Service and Repair
c. Check for leaks.
d. Perform the ABS Verification Test and road test the vehicle. See: Powertrain Management/Computers and Control Systems/Testing and
