Journey FWD V6-3.5L (2009)
6. If necessary, install the mounting pins (1) in the ICU (2) and tighten to 11 Nm (97 in. lbs.).
7. Install the ICU in the vehicle. See: Removal and Replacement/Integrated Control Unit (ICU) - Installation
Integrated Control Unit (ICU) - Disassembly
DISASSEMBLY
NOTE: The HCU and the ABM are not serviceable separately from the ICU for vehicles equipped with Hill Start Assist (HSA).
1. If necessary, remove the mounting pins from the ICU.