Journey FWD V6-3.5L (2009)
4. Remove the banjo bolt (3) connecting the brake flex hose (2) to the brake caliper (1). There are two washers (4) that will come off with the banjo
bolt. Discard the washers. They should not be reused.
CAUTION: When removing or installing a caliper guide pin bolt, it is necessary to hold the guide pin stationary while turning the bolt. Hold
the guide pin stationary using a wrench placed upon the pin's hex-shaped head.
5. Remove the two brake caliper guide pin bolts (2, 3).
6. Slide the disc brake caliper (4) from the disc brake adapter bracket (1) and brake pads and remove.
Rear
REMOVAL
NOTE: Before proceeding, See: Service Precautions/Technician Safety Information See: Service Precautions/Vehicle Damage Warnings .
1. Disconnect and isolate battery negative cable from battery post.
