dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Parking Brake Cable|Removal|Page 5275 > < Parking Brake Cable|Removal|Page 5273
Page 8
background image

9. Install tire and wheel assembly (1) See: Maintenance/Wheels and Tires/Service and Repair/Removal and Replacement/Tires and Wheels -

Installation. Install and tighten wheel mounting nuts (3) to 135 Nm (100 ft. lbs.).

10. If servicing the left rear cable, pass the leading end of the left rear cable (2) through the upper hole in the intermediate bracket (1). Press the cable

housing through the hole until the fingers on the retainer lock it into place.

11. If servicing a vehicle equipped with a foot lever:

a. Connect the parking brake cable equalizer (4) to the three parking brake cables (2, 3, 5) and reset the cable tension. See: Service and Repair 
b. Lower the vehicle.

12. If servicing a vehicle equipped with a hand lever:

a. Connect the parking brake cable equalizer/bent nail tensioner (4) to the three parking brake cables (2, 3, 5).

Parking Brake Cable|Removal|Page 5275 > < Parking Brake Cable|Removal|Page 5273