Journey FWD V6-3.5L (2009)
Parking Brake Lever: Service and Repair
Removal
Foot Operated Parking Brake Lever
FOOT OPERATED PARKING BRAKE LEVER
1. Release the parking brake.
2. Raise and support the vehicle. See: Maintenance
3. Manually release the parking brake cable tension. See: Service and Repair
4. Push the front cable strand into the housing until it bottoms.
5. Lower the vehicle.
6. Remove the left front door opening sill scuff plate.
7. Remove the lower cowl trim.
8. Remove the steering column opening cover See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Steering Column Opening Cover - Removal.
9. Remove the steering column cover reinforcement mounting screws (2). Remove the steering column cover reinforcement (1).
10. Pull the parking brake lever pedal up and hold it in this position.
11. Rotate the cable strand around at the lever mechanism until the strand lines up with the slot, then remove the cable end button (2) from the lever
mechanism (1).
NOTE: Prior to removing cable from lever, note cable routing through lever for ease in reassembly.
