Journey FWD V6-3.5L (2009)
10. Install the foam seal (2) onto the flange (1) at the bottom of the rear heater-A/C housing (3). Make sure that the foam seal is properly installed.
11. Install the rear heater-A/C housing See: Heating and Air Conditioning/Housing Assembly HVAC/Service and Repair/Removal and
Replacement/Rear HVAC Housing Installation.
12. Reconnect the negative battery cable.
13. If the rear heater core is being replaced, flush the cooling system See: Service and Repair.
14. Refill the engine cooling system See: Service and Repair.
15. Evacuate and charge the refrigerant system See: Heating and Air Conditioning/Service and Repair/Refrigerant System Charge.
