Journey FWD V6-3.5L (2009)
5. Install cylinder head cover bolts (4) and tighten to 10 Nm (90 in. lbs.).
6. Reconnect the wire harness retainers (1) to the valve cover.
7. Install the ignition coils See: Powertrain Management/Ignition System/Ignition Coil/Service and Repair/Ignition Coil - Installation.
8. Connect the ignition coil electrical connectors (2).
9. Reconnect the makeup air hose (3).
10. Install upper intake manifold See: Intake Manifold/Service and Repair/Intake Manifold - Installation.
11. Connect negative battery cable.