Journey FWD V6-3.5L (2009)
NOTE: When installing the camshaft (1) into the cylinder head (4), you must first insert Seal Protector Sleeve 6788 (2) through the camshaft
seal (3) until the camshaft seats, then remove Seal Protector Sleeve 6788 (2) from the camshaft.
4. Install the camshaft using Seal Protector Sleeve 6788.
5. Install the right cylinder head See: Cylinder Head Assembly/Service and Repair/Removal and Replacement/Cylinder Head - Installation.
LEFT CYLINDER HEAD
1. Position the camshaft seal into the cylinder head (3).
2. Using Camshaft installer MD-998306 (2) tap the seal into place using a mallet (1).