Journey FWD V6-3.5L (2009)
5. Install power steering pump fasteners. Tighten bolts to 23 Nm (200 lbs. in.).
6. Install crankshaft damper See: Cylinder Block Assembly/Harmonic Balancer - Crankshaft Pulley/Service and Repair/Vibration Damper -
Installation.
7. Install accessory drive belt tensioner. Torque fastener to 28 Nm (250 in. lbs.).
8. Install accessory drive belt See: Drive Belts, Mounts, Brackets and Accessories/Drive Belt/Service and Repair/Removal and
Replacement/Serpentine Accessory Drive Belt - Installation.
9. Lower the vehicle.
10. Connect negative battery cable.
Rear
INSTALLATION
1. Clean rear timing belt cover O-ring sealing surfaces and grooves. Lubricate new O-rings with Mopar(R) Dielectric Grease or equivalent to
facilitate assembly.
2. Position NEW O-rings on cover.