Journey FWD V6-3.5L (2009)
1. Using Trim Stick C-4755 or equivalent (1), disengage the three retaining tabs that secure the beverage cooler outlet (2) to side of the glove box bin
(3).
NOTE: If the beverage cooler cold air supply hose becomes disconnected from the air beverage cooler outlet and falls back into the
instrument panel during outlet removal, the beverage cooler bin may need to be removed from the instrument panel for outlet
installation See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Instrument Panel Beverage
Cooler Bin - Removal.
2. Carefully pull the beverage cooler outlet (1) away from side of the beverage cooler bin (3) and disconnect the cold air supply hose (2) from the
outlet. Make sure the end of the cold air supply hose remains in the bin and does not fall back into the instrument panel.
COLD AIR SUPPLY HOSE