Journey FWD V6-3.5L (2009)
Hose/Line HVAC: Description and Operation
A/C Suction Line - Description
DESCRIPTION
NOTE: A/C Suction line for 2.7L engine shown. Other engines similar.
The A/C suction line carries refrigerant from the A/C expansion valve to the A/C compressor and is serviced in two sections. The upper section of the
A/C suction line (1) includes the low side service port (2) and is only serviced as an assembly with the rear A/C liquid line (6). When equipped with rear
A/C, the A/C liquid and suction line assembly includes connections for the underbody refrigerant lines (3). The lower section of the A/C suction line (7)
connects to the upper section of the suction line and the connections are sealed by use of metal gaskets (5) and rubber O-ring seals (4)
NOTE: Replacement of the refrigerant line O-ring seals and gaskets is required anytime a refrigerant line is disconnected. Failure to replace
the rubber O-ring seals and metal gaskets could result in a refrigerant system leak.
The lower A/C suction line and the A/C liquid and suction line assembly has no serviceable parts except for the metal gaskets, rubber O-ring seals and
the service port valve cores. The O-ring seals used on the connections are made from a special type of rubber not affected by R-134a refrigerant. The
O-ring seals and gaskets must be replaced whenever the lower A/C suction line and/or the A/C liquid and suction line assembly is disconnected.
The lower A/C suction line and the A/C liquid and suction line assembly cannot be repaired and must be replaced if leaking or damaged.
