dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Diagram Information and Instructions|Page 1710 > < IOD Fuse - Removal|Page 1705
Page 1
background image

Fuse Block: Diagram Information and Instructions

Warnings

WARNINGS - GENERAL

 
WARNINGSprovide information to prevent personal injury and vehicle damage. Below is a list of general warnings that should be followed any time a
vehicle is being serviced.
 

WARNING: Always wear safety glasses for eye protection.

 

WARNING: Use safety stands anytime a procedure requires being under a vehicle.

 

WARNING: Be sure that the ignition switch always is in the off position, unless the procedure requires it to be on.

 

WARNING: Set the parking brake when working on any vehicle. An automatic transmission should be in park. A manual transmission should

be in neutral.

 

WARNING: Operate the engine only in a well-ventilated area.

 

WARNING: Keep away from moving parts when the engine is running, especially the fan and belts.

 

WARNING: To prevent serious burns, avoid contact with hot parts such as the radiator, exhaust manifold(s), tail pipe, catalytic converter and

muffler.

 

WARNING: Do not allow flame or sparks near the battery. Gases are always present in and around the battery.

 

WARNING: Always remove rings, watches, loose hanging jewelry and avoid loose clothing.

Warnings Hybrid Electric Vehicles (HEV)

WARNINGS - HYBRID ELECTRIC VEHICLES (HEV)

 
Hybrid Electric Vehiclesare equipped with a high voltage components and wiring. Each high voltage component is labeled with the high voltage
symbol. High voltage cables are orange in color or protected by metal conduit.
 

WARNING: On vehicles equipped with the high voltage system, you must thoroughly read and follow all High Voltage Safety Procedures.

These procedures are located in the Service tab, section 08-Electrical. In addition, before performing any diagnostic or service
procedure near a high voltage component, you must perform the High Voltage Power Down procedure located in the Service Tab,
08-Electrical/8 - Engine Systems/Battery System - Standard Procedure. Failure to follow these instructions may result in possible
serious or fatal injury.

How to Use Wiring Diagrams

Diagram Information and Instructions|Page 1710 > < IOD Fuse - Removal|Page 1705