Journey FWD V6-3.5L (2009)
If you have any questions or need assistance in completing this action, please contact your Service and Parts District Manager.
Customer Services Field Operations
Chrysler Group LLC
Service Procedure
1. Open the hood.
2. Roll down both front door windows.
3. Disconnect and isolate the negative battery cable at the left shock tower.
4. Remove the front door window switch, grab handle cup, and release handle bezel (Figure 1).
5. Remove the front door panel (Figure 1).
6. Remove the front door inner window seal (Figure 1).
7. Separate the oval wiring harness grommet from the lower "A" pillar (Figure 1).
