Journey FWD V6-3.5L (2009)
If an EGS TCM was replaced, perform the following additional steps and/or routines:
1. Initialize EGS
STEP-BY-STEP INSTRUCTIONS
Check PCM/ECM VIN
From the "Home" screen, select "ECU View"
-
Select "PCM/ECM"
-
Select "Misc. Functions"
-
Select "Check PCM/ECM VIN" and follow the on screen instructions.
-
When complete, select "Finish"
Diesel Particulate Filter (Used) Learning
From the "Home" screen, select "ECU View"
-
Select "PCM/ECM"
-
Select "Misc. Functions"
-
Select "Diesel Particulate Filter (Used) Learning" and follow the on screen instructions.
-
When complete, select "Finish"
ECU Replacement with Value Transfer
From the "Home" screen, select "ECU View"
-
Select "PCM/ECM"
-
Select "Misc. Functions"
-
Select "ECU Replacement with Value Transfer" and follow the on screen instructions.
-
When complete, select "Finish"
ECU Replacement without Value Transfer
From the "Home" screen, select "ECU View"
-
Select "PCM/ECM"
-
Select "Misc. Functions"
-
Select "ECU Replacement without Value Transfer" and follow the on screen instructions.
-
When complete, select "Finish"
Enable / Disable Vehicle Features
From the "Home" screen, select "ECU View"
-
Select "PCM/ECM"
-
Select "Misc. Functions"
-
Select "Enable / Disable Vehicle Features" and follow the on screen instructions.
-
When complete, select "Finish"
Exhaust Throttle Plate Adaptive Learn Position
From the "Home" screen, select "ECU View"
-
Select "PCM/ECM"
-
Select "Misc. Functions"
-
Select "Exhaust Throttle Plate Adaptive Learn Position" and follow the on screen instructions.
-
When complete, select "Finish"
Fuel Mean Value Adaptation Initialization
From the "Home" screen, select "ECU View"
-
Select "PCM/ECM"