dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Engine Controls - MIL ON/DTC P0452 Set In Memory|Page 4348 > < Engine Controls - MIL ON/DTC's P0420/P0430 Set|Page 4343
Page 1
background image

PROM - Programmable Read Only Memory: All Technical Service Bulletins
Engine Controls - MIL ON/DTC P0452 Set In Memory

NUMBER: 18-003-09 REV. C

GROUP: Vehicle Performance

DATE: June 11, 2009

THIS BULLETIN SUPERSEDES SERVICE BULLETIN 18-003-09 REV. B, DATED MAY 29, 2009, WHICH SHOULD BE REMOVED FROM
YOUR FILES. ALL REVISIONS ARE HIGHLIGHTED WITH **ASTERISKS** AND INCLUDES AN ADDITIONAL VEHICLE.

THE wiTECH DIAGNOSTIC APPLICATION IS THE PREFERRED METHOD FOR FLASHING ECUs.

HELP USING THE wiTECH DIAGNOSTIC APPLICATION FOR FLASHING AN ECU IS AVAILABLE BY SELECTING "HELP" THEN "HELP
CONTENTS" AT THE TOP OF THE wiTECH DIAGNOSTIC APPLICATION WINDOW.

THE wiTECH SOFTWARE LEVEL MUST BE AT RELEASE 9.05 OR HIGHER TO PERFORM THIS PROCEDURE.

StarMOBILE DESKTOP CLIENT or StarSCAN MAY ALSO BE USED TO PERFORM THIS PROCEDURE.

SUBJECT:
Flash: Driveability Improvements Or MIL Illumination Diagnostic Trouble Code P0452 - Evap Pressure Switch Stuck Closed

OVERVIEW:
This bulletin involves selectively erasing and reprogramming the Powertrain Control Module (PCM) with new software.

MODELS:

**2008

(CS)

Pacifica**

2009

(JC)

Journey

2007 - 2009

(JS)

Sebring/Avenger/Sebring Convertible

2008 - 2009

(RT)

Town & Country/Voyager/Caravan (Includes
International Markets)

NOTE

This bulletin applies to:

-

**2008 CS vehicles equipped with a 4.0L Engine (Sales Code EGO)**.

-

2007, 2008 JS vehicles equipped with a 2.4L Engine and Automatic Transmission (Sales Code EDG or ED3 with DFF) built before June 19,
2008

-

2007, 2008 and 2009 JS vehicles equipped with a 2.7L and 3.5L engine (sales code EER or EGF) built Before October 15, 2008 (MDH
1015XX)

-

2008 RT vehicles equipped with a 3.3L or 3.8L or 4.0L engine (sales code EGV, EGL or EGQ)

-

2009 RT vehicles equipped with a 3.3L or 3.8L or 4.0L engine (sales code EGV, EGL or EGQ built before May 11, 2009 (MDH 0511XX).

-

2009 JC vehicles equipped with a 2.4L engine (sales code ED3 or EDG) built before August 20, 2008 (MDH 0820XX)

-

2009 JC vehicles equipped with a 3.5L engine (sales code EGF) built before September 6, 2008 (MDH 0906XX)

SYMPTOM/CONDITION:
Some customers may complain that the engine stumbles, runs rough, has idle fluctuations and/or surges at idle or there is a MIL illumination. Further
investigation by the technician may find DTC:

-

P0452 - Evap Pressure Switch Stuck Closed

DIAGNOSIS:
Using a Scan Tool (wiTECH or StarSCAN(R)) with the appropriate Diagnostic Procedures available in TechCONNECT, verify all engine systems are
functioning as designed. If DTC's other then the one listed above are present record them on the repair order and repair as necessary before proceeding

Engine Controls - MIL ON/DTC P0452 Set In Memory|Page 4348 > < Engine Controls - MIL ON/DTC's P0420/P0430 Set|Page 4343