Journey FWD V6-3.5L (2009)
From the "Home" screen, select "ECU View"
-
Select "PCM/ECM"
-
Select "Misc. Functions"
-
Select "Program Variant Code" and follow the on screen instructions.
-
When complete, select "Finish"
Quick learn
From the "Home" screen, select "ECU View"
-
Select "PCM/ECM"
-
Select "Misc. Functions"
-
Select "Quick learn" and follow the on screen instructions.
-
When complete, select "Finish"
Reset Regenerative Filter Timers
From the "Home" screen, select "ECU View"
-
Select "PCM/ECM"
-
Select "Misc. Functions"
-
Select "Reset Regenerative Filter Times" and follow the on screen instructions.
-
When complete, select "Finish"
Set Oil Dilution Mass Value
From the "Home" screen, select "ECU View"
-
Select "PCM/ECM"
-
Select "Misc. Functions"
-
Select "Set Oil Dilution Mass Value" and follow the on screen instructions.
-
When complete, select "Finish"
SECTION 3 - AUTHORIZED MODIFCATION LABEL
NOTE: The following step is required by law when reprogramming a PCM/ECM and/or TCM.
Type the necessary information on the "Authorized Modification Label" and attach near the VECI label.
1. Powertrain Control / Transmission Control Module Part Numbers (Insert P/Ns) Used
2. Change Authority: TSB XX--XX
3. Dealer Code: XXXXX
4. Date: XX-XX-XX
REQUIRED TOOLS/EQUIPMENT: