Journey FWD V6-3.5L (2009)
Control Module HVAC: Description and Operation
Rear Blower Motor Power Module - Description
DESCRIPTION
A blower motor power module is used on this model when equipped with the automatic temperature control (ATC) rear heating-A/C system. Models
equipped with the manual temperature control (MTC) rear heating-A/C system use a blower motor resistor, instead of the blower motor power module .
The rear blower motor power module (1) is mounted to the inboard side of the rear heating-A/C housing, located on the right side of the vehicle. The
rear blower motor power module consists of a molded plastic housing with two integral wire connector receptacles (2) for the power module electronic
circuitry, a mounting plate (3) with a gasket and a finned aluminum heat sink (4).
The rear blower motor power module can be accessed for service without removing the rear heater-A/C housing.
