Journey FWD V6-3.5L (2009)
c.
Select "More Options".
d.
Select "ECU Flash".
e.
Select "Browse for New File".
f.
Enter Identification name and password.
g.
Press "Finish".
h.
Highlight the appropriate calibration based on the part number recorded in the PCM replacement procedure Step 2g for StarSCAN.
i.
Select "Download to Scantool".
j.
Select "Close" after the download is complete, then select "Back".
k.
Highlight the listed calibration.
l.
Select "Update Controller" and follow the on screen instructions.
m.
When the update is completed, select "OK".
n.
Verify that the part number at the top of the Flash PCM screen has updated to the new part number.
6.
Vehicles equipped with a Continuously Variable Transaxle (CVT), ensure that the Transmission Control Module (TCM) has the latest software
calibration available using the following procedure:
a.
From the "Home Screen," select "ECU View".
b.
Select "TCM".
c.
Select "More Options".
d.
Select "ECU Flash"
e.
Select "Browse for File".
f.
Follow the screen prompts to complete the process.
7.
Vehicles equipped with a Wireless Control Module (WCM), perform the following procedure:
a.
Starting at the "Home" screen, select "ECU View".
b.
Select "WCM Wireless Control".
c.
Select "Misc. Functions".
d.
Scroll down the list and select "PCM Replaced".
e.
Press the blue "Start" button on the StarSCAN screen.
f.
Press the "Next" button on the StarSCAN screen.
g.
Enter the Personal Identification Number (PIN) for that vehicle
NOTE:
The PIN number can be obtained from the original selling invoice, DealerCONNECT > Parts > Key Codes, or contacting the District
Manager.
h.
Follow the screen prompts to complete the process.
8.
Vehicles not equipped with a Wireless Control Module, perform the following procedure:
a.
Starting at the "Home" screen, select "ECU View".
