dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Seat Belt Buckle - Removal|Page 7544 > < Seat Belt Buckle - Removal|Page 7542
Page 2
background image

1. Engage the second row center seat belt buckle (1) through the elastic loop (3) of the right seat cushion trim cover.
2. Position the buckle lower anchor to the left rear corner of the right seat frame.
3. Install and tighten the screw (2) that secures the buckle unit to the right seat frame. Tighten the screw to 39 Nm (29 ft. lbs.).

4. Position the outboard center seat back hinge bracket outboard trim (2) over the buckle (1) anchor on the left rear corner of the right seat frame.
5. Using hand pressure, align and press the outboard center seat back hinge bracket outboard trim toward the hinge bracket until the snap clip that

secures the center of the trim snaps into the bracket.

6. Using hand pressure, squeeze the edges of the outboard center seat back hinge bracket outboard and inboard trim halves together until the four

integral latch features that secure the two halves of the trim to each other are fully engaged.

7. Install the plastic push-in fastener (3) that secures the outboard center seat back hinge bracket outboard trim over the buckle anchor.
8. Restore the second row left seat to the fully rearward position.

Second Row - Left

SECOND ROW - LEFT

WARNING: To avoid serious or fatal injury during and following any seat belt or child restraint anchor service, carefully inspect all seat belts,

buckles, mounting hardware, retractors, tether straps, and anchors for proper installation, operation, or damage. Replace any belt
that is cut, frayed, or torn. Straighten any belt that is twisted. Tighten any loose fasteners. Replace any belt that has a damaged or
ineffective buckle or retractor. Replace any belt that has a bent or damaged latch plate or anchor plate. Replace any child
restraint anchor or the unit to which the anchor is integral that has been bent or damaged. Never attempt to repair a seat belt or
child restraint component. Always replace damaged or ineffective seat belt and child restraint components with the correct, new
and unused replacement parts listed in the Chrysler Mopar (R) Parts Catalog. Failure to follow these instructions may result in
possible serious or fatal injury.

Seat Belt Buckle - Removal|Page 7544 > < Seat Belt Buckle - Removal|Page 7542