Journey FWD V6-3.5L (2009)
Seat Position Sensor: Description and Operation
Seat Track Position Sensor - Description
DESCRIPTION
The seat track position sensor (2) is a Hall Effect-type sensor used on some vehicles. This sensor consists of a Hall Effect Integrated Circuit (IC) chip
encased in potting material within a cavity of the molded plastic sensor housing.
The sensor housing has a mounting slot containing an integral latch feature (1) and slides and latches onto a stamped metal blade-type bracket located on
the inboard side of the upper inboard seat adjuster track near the rear of the driver side front seat. A molded connector receptacle (3) integral to the
sensor housing is connected to the vehicle electrical system through a connector and take out of the driver side front seat wire harness beneath the front
seat cushion frame.
The seat track position sensor cannot be adjusted or repaired and, if ineffective or damaged, the entire sensor must be replaced.
