Journey FWD V6-3.5L (2009)
Integrated Accessory Switch Assembly: Service and Repair
Instrument Cluster Switch Pod - Removal
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the instrument panel center bezel. See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Instrument Panel Bezel - Removal.
3. Disconnect the electrical connector from the switch by depressing the lock tab and pulling connector from the ASBM.
4. Remove the four screws (1) to the Accessory Switch Bank Module (ASBM).
5. Remove the ASBM from the instrument panel center bezel.