Journey FWD V6-3.5L (2009)
11. Depress the four mounting clips (2) to disengage and remove the TIPM housing (1) from its mounting bracket, position aside to allow access to the
battery harness.
12. One at a time, trace any remaining battery harness retaining push pins, fasteners and routing clips until the harness is free from the vehicle.
13. Remove the battery harness from the vehicle.
STARTER HARNESS
1. Remove the negative battery cable remote terminal nut (5) from the remote negative battery post (1). Remove and isolate the battery harness
negative cable (4) on something other than the remote negative battery post (1).
2. Remove the starter harness negative cable retaining nut (3) and remove the cable (2) from the remote negative battery post (1).
