Journey FWD V6-3.5L (2009)
Battery Tray: Service and Repair
Battery Tray - Removal
REMOVAL
WARNING:
To protect the hands from battery acid, a suitable pair of heavy duty rubber gloves should be worn when removing or servicing a
battery. Safety glasses also should be worn.
WARNING: Remove metallic jewelry to avoid injury by accidental arcing of battery current.
CAUTION: The negative battery cable remote terminal (2) must be disconnected and isolated from the remote battery post (1) prior to service
of the vehicle electrical systems. The negative battery cable remote terminal can be isolated by using the supplied isolation hole (3)
in the terminal casing.
1. Disconnect and isolate the negative battery cable remote terminal from the remote battery post.
2. Remove the battery See: Service and Repair/Removal and Replacement/Battery - Removal.
3. Remove the four bolts (2) securing the battery tray (3) to the left front frame rail (1).
4. Remove the battery tray from the vehicle.
