Journey FWD V6-3.5L (2009)
8. Disconnect the body electrical connectors from the front door wiring harness (Figure 2).
9. Remove the two door grommet retaining screws (Figure 2).
10. Remove the door speaker from the door and disconnect the electrical connector (Figure 2).
11. Open the access door and disconnect the door latch electrical connector (Figure 3).
12. Disconnect the remaining electrical connectors and remove the front door wiring harness from the vehicle (Figure 2).
CAUTION:
Note the wiring harness routing before removing the wiring harness from the door. The new wiring harness must be routed in the same location as the
original wiring harness.
13. Place the new front door wiring harness into position on the door.
14. Connect the front door wiring harness connectors to the body electrical connectors.
