Journey FWD V6-3.5L (2009)
Ignition Switch: Service and Repair
Wireless Ignition Node Receiver - Installation
INSTALLATION
NOTE: The WIN initialization procedure is required whenever the WIN or shaft lock module is replaced on vehicles equipped with the shaft
lock module.
1. Rotate and position the WIN (1) and bracket (2) into the to instrument panel opening.
2. Install the lower WIN bracket attaching screw (4).
3. Install the lower WIN attaching screw (5).
4. Connect the WIN electrical connector (1) and antenna connector (3) to the WIN.
5. Install the WIN trim ring (2).