Journey FWD V6-3.5L (2009)
12. Install front mount through bolt (1) to transmission bracket (2) and mount (3). Tighten bolt to 47 Nm (35 ft. lbs.).
13. If equipped, install belly pan.
NOTE: Make sure the lower heat shield is installed to the lower stud before the upper heat shield is install. The upper heat shield stacks on
top of the lower heat shield, and both shields are held together by the lower nut.
14. Position heat shield (2) over the studs and install heat shield nuts (1), (3). Tighten nuts to 12 Nm (106 in. lbs).
15. Connect negative battery cable, tighten nut to 5 Nm (45 in. lbs.).
