dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Engine Controls/Steering - Power Steering Whine|Page 6358 > < Engine Controls/Steering - Power Steering Whine|Page 6352
Page 1
background image

Power Steering Pump: All Technical Service Bulletins
Engine Controls/Steering - Power Steering Whine

NUMBER: 19-001-08

GROUP: Steering

DATE: April 3, 2008

THE StarSCAN(R) FLASH FILES FOR THIS BULLETIN MUST BE RETRIEVED FROM THE INTERNET.

StarSCAN(R) SOFTWARE LEVEL MUST BE AT RELEASE 8.04 OR HIGHER.

StarMOBILE DESKTOP CLIENT -OR- StarMOBILE STANDALONE MODE MAY ALSO BE USED TO PERFORM THE FLASH.

SUBJECT:
Flash: Power Steering Whine Sound / Coordinated Hardware Change

OVERVIEW:

This bulletin involves replacing the Power Steering Pump with a revised part and selectively erasing and reprogramming the Powertrain Control Module
(PCM) with new software.

MODELS:

2009

(JC)

Journey

NOTE:

This bulletin applies to models equipped with a 3.5L engine (Sales Codes EGF) built prior to February 29, 2008 (MDH0229XX).

SYMPTOM/CONDITION:

Some customers may hear a high pitched whine sound between 1200 and 2000 engine RPM. The whine may be most noticeable when accelerating from
a stop.

DIAGNOSIS:

Start the engine and raise the engine speed to between 1200 and 2000 RPM. With the RPM raised, listen for a high pitched whine sound. If a high
pitched whine is heard and determined to be coming from the power steering system, perform the Repair Procedure.

NOTE:

Do not move the steering wheel during the test. The whine sound is heard with no load on the power steering pump.

PARTS REQUIRED:

Engine Controls/Steering - Power Steering Whine|Page 6358 > < Engine Controls/Steering - Power Steering Whine|Page 6352