Journey FWD V6-3.5L (2009)
24. Verify the front wheels of vehicle are in the STRAIGHT-AHEAD position.
25. Center the intermediate shaft coupling (1) over the steering gear pinion shaft (3), then slide the intermediate shaft onto the steering gear pinion
shaft.
26. Install the intermediate shaft coupling bolt (2). Tighten the bolt to 42 Nm (31 ft. lbs.).
27. Position the sound deadening insulation and floor carpet back into place.
28. Fill and bleed the power steering system. See: Service and Repair/Steering - Power Steering System Bleeding
29. Check for fluid leaks.
30. Perform wheel alignment as necessary. See: Alignment/Service and Repair
