Journey FWD V6-3.5L (2009)
Tire Pressure Sensor: Service and Repair
Tire Pressure Monitoring (TPM) Sensor - Installation
INSTALLATION
NOTE: Before reinstalling an existing tire pressure sensor, replace seal (2) and metal washer (1) at base of sensor valve stem (6) to ensure
proper sealing.
1. Wipe area clean around sensor/valve stem mounting hole in wheel (5). Make sure surface of wheel is not damaged.
CAUTION: To avoid damaging sensor antenna strap (1), if equipped, hold pressure against rear of metal valve stem (2) while sensor is
inserted through wheel mounting hole and nut is installed.
