Journey FWD V6-3.5L (2009)
4. Connect the harness connectors (1, 2).
5. Install the shifter knob (1).
6. Verify the shifter and transaxle are both in Park.
7. Loosen the cable adjust bolt, then tighten the bolt to 6 Nm (40 in. lb.).
4. Connect the harness connectors (1, 2).
5. Install the shifter knob (1).
6. Verify the shifter and transaxle are both in Park.
7. Loosen the cable adjust bolt, then tighten the bolt to 6 Nm (40 in. lb.).