Journey FWD V6-3.5L (2009)
5. Remove any retaining clips, then slide the brake rotor (2) off the hub and bearing (1).
CAUTION: Prior to removal, clean area around sensor head to help prevent contaminants from entering bearing when sensor head is
removed.
6. Remove the screw (3) fastening the speed sensor head (2) to the hub and bearing (1).
7. Remove the wheel speed sensor head (2) from the hub and bearing (1), then pass it through the brake shield.
8. Remove the four bolts (21) securing the hub and bearing (1) to the knuckle.
9. Remove the hub and bearing.
