Journey FWD V6-3.5L (2009)
NOTE: Windshield opening shown, quarter glass opening similar.
3. Clean and dry area of quarter glass opening to be re-glued with a suitable glass preparation solvent and rag.
4. Re-prime any damaged area. If old adhesive has been exposed for more than 12 hours, entire adhesive area needs to be re-primed.
NOTE: Make sure the primer does not touch the locating pins and tabs.
5. Allow primer to air dry for at least 10 minutes.
Quarter Glass Installation
1. Apply bead of adhesive (1) with a triangular nozzle directly to the quarter glass seal starting at bottom in center of the quarter glass.
CAUTION: Always apply bead of adhesive to the quarter glass. Always install the quarter glass within 5 minutes after applying adhesive.
