Journey FWD V6-3.5L (2009)
7. If the vehicle is so equipped, reconnect the FEM wire harness connector and headlamp washer supply hose (1) to the headlamp washer pump
/motor unit. To reconnect the quick connect fitting (4), first seat the molded plastic lock (2) onto the washer supply hose quick connect fitting.
Next, push the quick connect fitting onto the headlamp washer pump/motor unit outlet nipple (3) until it snaps into place with an audible click.
8. If removed, reinstall the air filter housing. See: Engine, Cooling and Exhaust/Engine/Tune-up and Engine Performance Checks/Air Cleaner
Housing/Service and Repair/Air Cleaner Body - Installation.
9. Refill the washer reservoir with the washer fluid drained from the reservoir during the removal procedure.
10. Reconnect the battery negative cable.