Journey FWD V6-3.5L (2009)
Windshield Washer Spray Nozzle: Service and Repair
Washer Nozzle - Removal
Front
FRONT
1. From the underside of the hood (3), remove the push-in retainers that secure the rear edge of the hood silencer pad to the inner hood reinforcement
as necessary to access the washer nozzle hose (2) connections.
2. From the underside of the hood, disconnect the washer nozzle hose from the barbed nipple (1) of the washer nozzle.
3. From the underside of the hood, release the integral latch features of the washer nozzle (1) and push the nozzle out through the mounting hole
toward the top side of the hood.
4. Remove the washer nozzle from the top of the hood panel.
Rear
REAR
NOTE: The rear washer nozzle latch feature is a one time component, and will be damaged if the nozzle is removed from its mounting hole for
service. If removed from its mounting hole for any reason, the rear washer nozzle must be replaced with a new unit.