Lancer L4-135 2.2L SOHC (1986)
FIGURE 1
2.
Drill a 7.0 mm (9/32" or "J" letter size drill) hole into the liftgate inside panel through the current cord clip hole (Figure 1).
CAUTION:
USE CARE WHEN DRILLING SO DRILL DOES NOT DENT OR GO THROUGH OUTER LIFTGATE SURFACE.
3.
Install new shelf panel cord hanger clip, PN H285EK3 (Figure 1).
POLICY:
Reimbursable within the provisions of the warranty
TIME ALLOWANCE:
Labor Operation No.
23-20-72-90
0.2 Hrs.
FAILURE CODE:
11 - Broken or Cracked