Lancer L4-135 2.2L SOHC (1986)
FIGURE 4 - (K-BODY) TURBO SHOWN
f.
Locate the 3/16" hose which connects the intake manifold vacuum source with the fuel pressure regulator. Remove 3/4" from this hose at its
mid-point and insert "Y" connector, PN 4275571.
g.
Using 3/16" hose (available in bulk 50' roll, PN 4105167), connect the lower nipple of the solenoid nearest the passenger side shock tower
to the "Y" connector installed in Step f. Route this hose on top of the convolute tubing which sits next to the cylinder head cover. This hose
should be long enough to reach, but not so long as to droop or kink (Figure 4).
19.
Reinstall passenger side carpeting and right side kick panel.
