Magnum V6-2.7L VIN R (2005)
2. Install thermostat (5) and seal (2) into thermostat housing (1).
3. If removed, install two studs.
4. Install thermostat, thermostat housing (5) and O-ring and bolt (4). Tighten attaching bolts to 12 Nm (105 inch lbs.).
5. Lubricate new heater return tube O-ring with coolant.
6. Position heater return tube flange over two studs. Install nuts. Tighten retaining nuts (3) to 6 Nm (53 inch lbs.).
7. Tighten starter bolt to 54.3 Nm (40 ft. lbs.).
8. Connect the lower radiator hose to the thermostat housing. Install hose clamps.
9. Refill cooling system.
10. Connect negative cable.
